Everhardt 'Super Flex' series – made in Texas, USA

The TSM-series are pre-tuned for the standard 40 CB channels. The antennas are top loaded helical wound around a 1/4 inch fiberglass rod with ‘Super Flex’ feature to help prevent breakage.

Features:

3/4 wave antenna

Top loaded

1000 Watts ‘Talking Power’

36 inch (90 cm) long

SWR below 1.5:1 (40 channels)

'Trim-to-Tune', tunable between 26 - 29 MHz

Exclusive ‘VibraSorb’ and ‘Super Flex’ anti-breakage design

3/8 mounting

Needs an 18 foot (550 cm) antenna cable for a good SWR

Trim-to-Tune:

Remove the antenna cap

Remove the antenna foil till the wire coil is visible

Pull out the wire carefully and trim it only a bit and push it back

Put the antenna cap back

Measure the SWR and repeat the procedure till you have a good SWR