The Mashin SC-600 Battery chargers are fully automatic, spark proof and reverse polarity protected and easy to use. The SC-600 smart battery charger will undergo a multi stages during the charging process to revive, charge, recondition and maintain all types of lead-acid batteries, prolong their life. Furthermore, charging only to meet the needs of the battery and therefore eradicating the possibility of over-charging or under-charging the battery and reducing its lifespan as a result. The Mahin SC-600 meet the certified of CE, FCC, IV the Certified by the California Energy Commission (CEC) and RoHS.
Ease Of Use and Safety Functions:
- Pulse charged: Pulse mode can remove the lead sulfate crystallization which was adhered to the electrode plate and recover the electrode plate's proper power storage area.
- Cycle Charged function: When the battery voltage drops, automatically performs a floating charge and periodically cycle charging, in the long term to ensure that the battery is fully charged the normal state.
- Boost Charging mode(Battery Rescue Mode): When over discharge batteries unable to perform normal mode or unable be charged, the AI Boost charging mode are able be rescue.
- 1A / 4A / 6A charging current selectable.
- Handheld device charging function: Standard 5V USB charging port support Maximum 1.5A.
- Complete safety protection : Prevent the battery from reverse polarity, short circuit, Anti-Are. the battery is automatically shut off the DC output when disconnect to prevent spark and short.
8 Stage Charging Mode
1. Soft start: Tests if the battery can accept charge. Charging begins if the battery is ok.
2. Pulse: Pulsing voltage removes sulphates from the lead plates of the battery restoring the battery capacity.
3. Bulk: Charging with maximum current until approximately 80% battery capacity.
4. Absorption: Charging with constant voltage and declining current to equalizing and maximize up the battery capacity.
5. Test: Tests if the battery can hold charge.If the batteries voltage drops below 11.6V within 10 minutes,battery is faulty.
6. Float: Keep the battery voltage at maximum level by providing a constant voltage charge.
7. Maintenance: Battery maintenance mode active when the battery voltage is lower than 12.6V the charger automatically start maintenance charging.
8. Top-up: Auto recharge your battery every 15 days once again after complete charged.
- Input Power: AC100V ~ AC 240V 50/60HZ
- Normal Voltage: DC 12V
- Charging Voltage:
- Normal Mode: max.DC14.4V
- Snow Mode: max.DC14.7V
- Boost Charging Mode: max. DC16.5V
- USB Charging Voltage (Handheld device charged)
- DC 5V 1A (max1.5A) (Standard USB interface)
- Charging Current: 1A /4A / 6A (current selection)
- Short Circuit Protection
- Over-temperature Protection
- Spark Protection
- Abnormal Battery Voltage Protection
- Abnormal Battery Protection
- Reverse Polarity Protection
- Disconnection Protection
- Anti-arc Protection
- Operating Temperature: Ambient temperature 0~40C, Humidity 90%
- Dimensions (L x W x H): 176 x 77 x 46 mm ±2mm
- Weight: 0.68 kgs