Dealer login and registration   |   E-Mail Choose your language:     
Your shopping cart contains  0  items
Follow K-PO on Facebook
Become our official KBC dealer and make money selling our products.







Categories

Sirio Wireless Antennas
World Receivers / DAB+ / WLAN
Bosch Truck Radio
RF Systems
Package Deals
CB Radios / 10 Meter Radios
DMR Radios
Digital PMR-446
PMR-446
Amateur Radios
Professional Radios
Cases
Radio Accessories
Marine
Scanners
Speakers
Motorbike Headsets
Microphones / Headsets
SWR Meters
Antenna Analyzers (11)
SWR / PWR Meters (29)
SWR / PWR Meters with Matchers (3)
S-meters (1)
Tuners / Matchers (17)
Comet (3)
mAT-tuner (12)
Zetagi (2)
Audio Interfaces
Amplifiers
AC / DC Products
TV Antennas
Antennas
Antenna Accessories
Cables / Connectors / Adapters
Spare Parts
Alarm Systems / Security Products / Flashlights
Professional Instruments
RoadSeo Series
Trucker Accessories / Gifts
Cameras
Medical Solutions
Music
B-Stock Sale
Rest stock
Discontinued Products







 

MAT-180H


Tuner for modern Kenwood and Icom HF transceivers. Needs optional interface cable




ORDER HERE
MAT-180H
Product code: 700718

€ 189,95
incl. VAT

Stock information


    No stock


Add to shopping cart:

Order Quantity
    The mAT-180H provides automatic antenna tuning across the entire HF spectrum plus 6 meters, at power levels up to 120 watts. It will tune dipoles, verticals, Yagis, or virtually any coax-fed antenna. It will match an amazing range of antennas and impedances, far greater than some other tuners you may have considered, including the built-in tuners on many radios.

    The mAT-180H is an automatic antenna tuner specially designed for modern ICOM and KENWOOD HF transceivers. It has two optional control cables to choose from: mAT-CI and mAT-CK. They are suitable for ICOM and KENWOOD transceivers respectively. With matching control cables, tuners can be used for corresponding transceivers.

    When mAT-180H is used in ICOM transceiver through the optional mAT-CI control cable, it is fully compatible with the original AH-3 and AH-4 automatic tuners of ICOM. Transceivers that can use both ICOM tuners can also use mAT-180H, which includes IC-706, 703, 718, 7000, 7100, 7200, 7300, 7410, 746, 756, 7600 series transceivers.

    When the tuner is used in KENWOOD transceiver through the optional mAT-CK control cable, it is fully compatible with KENWOOD original tuners, such as AT-250, AT-300. KENWOOD transceivers that can use mAT-180H are TRC-80, TK-80, TS-2000, 50, 450, 480SAT (excluding HX version), 570, 590, 850, 870, 990, etc. Other types of transceivers can use mAT-180H as long as they support KENWOOD AT-300 tuners. KENWOOD TS-430, TS-440 are too old to use this tuner.

    The mAT-180H has 16,000 frequency memories. When tuning on or near a previously tuned frequency, the mAT-180H uses "Memory Tune" to recall the previous tuning parameters in a fraction of a second. If no memorized settings are available, the tuner runs a full tuning cycle, storing the parameters for memory recall on subsequent tuning cycles on that frequency. In this manner, the mAT-180H "learns" as it is used, adapting to the bands and frequencies as it goes.

    There are four fine-tuning buttons on the front panel of the mAT-180H, and sometimes you can get a lower SWR with them. It also has a "TUNE" button on the front panel, which can also start tuning.

    To facilitate the use of wire antennas, in addition to having two SO-239 standard RF sockets, the rear panel of the mAT-180H has two terminals, one red and one black. Red terminal connecting wire antenna, black terminal connecting ground wire. The mAT-180H connects to the transceiver via its tuner jack to control the tuning cycle, the transceivers tune button controls the tuner. The tuner jack also powers the tuner, so it requires no external power supply.

    SPECIFICATIONS
  • 0.1 to 120 Watts SSB and CW peak power, 30 Watts on PSK and digital modes, 100 Watts on 6 meter band.
  • 16,000 memories for instantaneous frequency and band changing.
  • Tuning time: 0.1 to 5 seconds full time, 0.1 seconds memory tune.
  • 1.6 to 54.0 MHz coverage. Built-in frequency sensor.
  • Tunes 5 to 1500 Ohm loads.
  • For dipoles, verticals, Vees, beams, whip, wire or any coax-fed antenna.
  • Dimensions (L x W x H): 20 x 13 x 4 cm
  • Weight: 0.8 kg

    Please note: The mAT-180H is rated at 120 Watts maximum power input at most. Many HAM transceivers, and virtually all amplifiers, output well over 120 Watts. Power levels that significantly exceed specifications will definitely damage or destroy your mAT-180H. If your tuner fails during overload, it could also damage your transceiver. Be sure to observe the specified power limitations.



©2021 KBC IMPORT / EXPORT · Argonstraat 6 · 6718 WT Ede · The Netherlands
Phone.: +31(0)318 552491 - Contact & Imprint - Privacy policy - E-mail: info@k-po.com