AnyTone - BT-01
The AnyTone BT01 remote control Bluetooth speaker microphone gives you full control over your AnyTone AT-D578UV radio. The AnyTone BT01 has a large and clear 2.2 inch display and a front speaker for clear audio.
Can be connected wirelessly via Bluetooth with a range of around 10 meter or with the supplied 4.0 meter long remote control cable directly to your AnyTone AT-D578UV.
It can be charged with the supplied UCB-C type charging cable (5V USB main charger not included) or when the remote cable is connected it will charge automatically.
Please note that the Bluetooth firmware of your AnyTone AT-D578UV should be V10043 or higher. Previous Bluetooth firmware versions of the AnyTone AT-D578UV should be updated if they don't connect with the AnyTone BT-01. The Bluetooth firmware update procedure is available on request and only for customers that purchased the AnyTone BT-01 with us.
- Suitable for: AnyTone AT-D578UV Plus / AnyTone AT-D578UV III PLUS / AnyTone AT-D578UV PRO / AnyTone AT-D578UV III PRO /
- Volume control: Yes
- Bluetooth: Yes
- Bluetooth version: V4.2 +EDR
- Protocol: HFP / HSP / A2DP / AVRCP / SPP
- Noise reduction: Yes, for TX and RX
- Program: Yes, P1 - P3 programmable
- Sensitivity: -80 dBm
- Audio performance: SBC Decoding
- Transmission power: Class 2 / 4 dbm
- Transmit distance: ± 10 meters
- Display: LCD 2.2 inch
- Length: 109 mm
- Height: 28 mm
- Width: 62 mm
- Weight: 137 gram
- Accessory connector: USB C type
- Operating temperature range: -20 to 55 °C
- Speaker: 2 Watt / 8 Ohm
- Charging: 5 Volt / USB C type
- Interface: 3.5 mm
- Battery: 1800 mAh / 3.7 Volt
Inside the box
- AnyTone BT-01: Yes
- Belt clip: Yes
- Remote cable: Yes, 4 meter
- USB-C type charging cable: Yes (5V USB main charger not included)
- User manual: Yes